Ceramic coating, paint correction and paint protection for Moorabbin 3189 — mobile, at your home or workplace, or at our Berwick studio about 28 km away.
Moorabbin sits beside working industry, and that changes what settles on a car here. Fine airborne metal, paint overspray from nearby workshops and grit from heavy vehicles land on horizontal panels and bond to the clear coat.
There is no sales team and no subcontracting. Andy assesses, corrects and coats every car from Moorabbin himself, with more than thirty years on paint behind him, and will tell you honestly if a job is not worth doing.
Around Moorabbin station, Holmesglen Private Hospital and Holmesglen TAFE Moorabbin Campus.
The plastic-bag test tells you: run your hand over a washed panel inside a thin bag. If it feels like fine sandpaper, the paint is contaminated.
Rail lines shed fine metal dust that behaves exactly like industrial fallout and needs the same chemical removal.
Industrial roads carry a lot of grit and brake dust, which loads wheels and lower panels faster than a normal suburban street.
Cars left in an industrial car park all day take the full dose. A coating is what stops the contamination bonding while you are at work.
You get a straight assessment of what the paint needs, and what it does not.
Wash, iron treatment and clay, so the surface is genuinely clean before it is corrected.
Swirls, holograms and etching are levelled out by machine, measured as we go.
A certified coating, a proper cure, a registered warranty and a simple wash routine.
Andy is mobile as well as studio-based, so the work can be done at your place in Moorabbin or at the Berwick studio, about 28 km away. Work vehicles and fleets can be done at your workplace or depot so they are not off the road for a drop-off; private cars at home or in the studio, whichever is easier. Tell us where the car is kept when you book and you will get a straight answer on which suits the job.
Yes, including trays, canopies and trim. A coated work vehicle takes a fraction of the time to clean.
The environment will keep putting it there, but on coated paint it struggles to bond and most of it comes off in a normal wash.
No. Fallout is metal particle that corrodes into the clear coat; overspray is paint or similar material that bonds on top. They are removed differently, which is why we assess before touching the paint.