Professional paint protection for Springvale South 3172: decontamination, correction and a certified coating, carried out on site in Springvale South or at the CDS studio in Berwick.
Cars parked or garaged near the industrial estates around Springvale South collect contamination most suburban cars never see. The good news is that almost all of it is removable, and once the paint is properly clean a coating stops it keying in again.
CDS is owner-operated. The person who looks at your paint is the person who corrects and coats it — Andy, with 30+ years of experience — so what you are quoted for Springvale South is exactly what gets done.
Around Springvale South Shopping Village, Springvale Plaza and Hosken Street Shopping Centre.
Industrial roads carry a lot of grit and brake dust, which loads wheels and lower panels faster than a normal suburban street.
Cars left in an industrial car park all day take the full dose. A coating is what stops the contamination bonding while you are at work.
Airborne metal particle lands on the bonnet, roof and boot and corrodes into the clear coat as tiny orange specks. It is dissolved with an iron treatment, then clayed out.
Spray booths and fabrication shops release paint mist that drifts onto cars in nearby car parks. It bonds hard and is removed without cutting the paint down.
You get a straight assessment of what the paint needs, and what it does not.
Wash, iron treatment and clay, so the surface is genuinely clean before it is corrected.
Swirls, holograms and etching are levelled out by machine, measured as we go.
A certified coating, a proper cure, a registered warranty and a simple wash routine.
We can come to you in Springvale South, or you can bring the car to the studio in Berwick, roughly 19 km away - both are on offer. Work vehicles and fleets can be done at your workplace or depot so they are not off the road for a drop-off; private cars at home or in the studio, whichever is easier. If you are unsure, send a photo of where the car lives with your enquiry and we will work out the best option.
Yes, including trays, canopies and trim. A coated work vehicle takes a fraction of the time to clean.
The environment will keep putting it there, but on coated paint it struggles to bond and most of it comes off in a normal wash.
No. Fallout is metal particle that corrodes into the clear coat; overspray is paint or similar material that bonds on top. They are removed differently, which is why we assess before touching the paint.